Cleaning process of three-dimensional motion mixer

Three-dimensional motion mixer is widely used in the chemical industry, pesticides, dyes, medicine, food, feed, petroleum, metallurgy, mining and other industries, a variety of powder particles of the mixture, in the process of mixing, but also increase the surface area of the material contact, in order to promote the chemical reaction; but also able to accelerate the physical changes, for the density, composition is different, immiscible liquids, stirring the resulting shear effect and strong turbulence will be the density of liquid Tear into small droplets and make it evenly dispersed into the main liquid. Three-dimensional movement mixer is mainly used for thermoplastic materials (such as rubber and plastics) and additives mixed; powder, granular solid material mixing machinery is mostly intermittent operation, but also includes both mixing and grinding effect of machinery, such as wheel rolling machine, etc., is the use of mechanical force and gravity, etc., will be two or more than two kinds of materials evenly mixed up machinery and equipment, in the mixing process, but also increase the surface area of the material contact, in order to promote the Chemical reaction; also able to accelerate physical changes.



  Clean up three-dimensional motion mixer before the equipment to electric must stop, in order to prevent electrical failure, resulting in unnecessary accidents; clean up the process is as follows:



1. Open the three-dimensional motion mixer weighing door and warehouse door, with the gas pipe to blow in, blowing clean surface dust and accumulated material;

2. Pull out the three-dimensional motion mixer gas pipe or bend the gas pipe is fine, to ensure that there is no gas through to the mixer. (To be in the case of warehouse door open, so that later clean up the accumulation of material can fall down, but also ventilation, otherwise the mixer will automatically close the warehouse door);

3. Hit the gate;

4. into the three-dimensional motion mixer, first use a spanner to remove the nozzle, blowing clean with air to be installed. Then use the shovel to shovel off the bin wall and paddle on the material. (Shovel homemade, according to the size of the mixer with iron welded to the iron pipe, sharpening iron side on the line);

5. According to the need is can manpower to turn the paddle to clean up the dead space. Clean up and then install the nozzle;

6. Fix the fan in the weighing door to blow inwards, three-dimensional motion mixer staff to enter to wear long clothes and trousers, skin shall not be exposed! Wear safety helmets, masks. Personnel to have two people, one into a person outside to help;

7. to half an hour to prevail in the work of a new person

Work, the correct operation of three-dimensional motion mixer, to ensure the smooth progress of the work and the safety of employees.