How to clean the 3D motion mixer?

The cleaning of the three-dimensional motion mixer is simple, as long as you add water to the hopper, switch on the machine and rotate it, and then release the water, you can clean it. The sealing structure of three-dimensional movement mixer is carefully designed, reliable sealing performance, easy maintenance and disassembly, all gears are heat-treated, long service life. Three-dimensional movement mixer mixing evenly, can not find a small group and small pieces, mixing time is short, each mixing of 150 kg of powder only 3-4 minutes.

Three-dimensional movement mixer reducer must be replaced every three months with new oil, often used. When replacing, the reducer should be cleaned and added with new oil.

Check parts for worm gear, worm gear, bearings, oil seals, mechanical parts of the regular inspection 1-2 times a month. Whether the running parts are flexible, whether the fasteners are loose, and whether abnormalities are found should be dealt with in time.

If the machine is found to vibrate abnormally or make abnormal sound, the use of the process. Should immediately stop the machine to check.

Faults found should be repaired in a timely manner. Electrical control parts should be kept clean and sensitive.

Mixing slurry loading and dismantling should be light dismantling, stable loading, light put, in order to avoid deformation and damage.

Three-dimensional motion mixer should be brushed clean all parts of the residual material, the end of use. Must be three-dimensional movement mixer all wipe clean, the surface of the machine parts coated with antirust oil, with a tarpaulin cover.