Instructions for checking the operation of three-dimensional motion mixers

Three-dimensional motion mixer operation check and maintenance

1. check all the connecting buttons, should be firmly connected, no loose leakage.

2. equipment according to the requirements of the position, connect the power supply.

3. check the transmission gears, sliding bearings are injected long lubricating oil. 4. check the speed reducer often replace the stems.

4. check the speed reducer often replace the oil.

5. check the moving parts of the working parts wear and tear, for the necessary replacement.

6. hand dial the active wheel of each moving part, observe each working condition without blocking the phenomenon of card, and timely adjustment.

7. the transmission chain, the triangle belt loosening and tightening is appropriate, there is a surplus of adjustment.

8. Remove the debris on the working surface of the barrel to keep it clean.